H-K Fischer plastic mesh sleeve

Mesh sleeve, designed for economical mortar consumption in hollow brick walls.

Advantages
The mesh sleeve of the FIS H K anchor is designed for the use of FIS V, FIS Green and FIS P Plus injection mortars and ensures lower mortar consumption while maintaining an excellent fit.

Centring wings in the mesh sleeve stabilize the anchor, enable the use of threaded rods of different diameters.

The hook-shaped catches hold the sleeve in the hole and enable trouble-free installation at a height.

The geometry of the mesh sleeve enables the connection of non-load-bearing layers of the substrate, which affects the ease and convenience of installation.
The fischer mesh sleeve FIS H K for injection anchoring is a system element for professional, mortar-saving installation of FIS A anchor rods or FIS E internal thread anchors in perforated brick walls. Used with injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS Green, FIS P and Fis P. The optimized grid structure saves injection mortar material. When installing the threaded rod and the anchor with internal thread, the mortar is pressed through the grid, adapting to the shape of the perforated brick. The loads are thus transferred to the substrate. Installation takes place in the pre-assembly method. The injection anchor sleeve can connect non-load-bearing layers. Approval conditions for injection mortars apply.